Redline RDL-3000 SC Installation Manuallines Download Page 54

Page: 54 / 65

RDL-3000

INSTALLATION GUIDELINES

70-00159-01-06

Page

of 65

kune 12, 2012

Add a Service

This step enables the subscriber to forward all Ethernet traffic received on the subscriber
Ethernet port.

Click

Provisioning -> New Service

in the web page main menu.

Enter data for the following fields:

Name

: Service-1

Tagging mode

: Pass-through

Use defaults for all other fields.

Click

Apply

to activate this Service.

Click

Save All

in the main menu to permanently save all changes to the provisioning

configuration.

The system is now configured to transparently pass Ethernet traffic over the wireless
interface.

Note

: If additional Links and Service Groups are added, it will be necessary to choose

the parent Link and parent Service Group when adding each new Service.

Summary of Contents for RDL-3000 SC


































































Search results

Summary of Contents for RDL-3000 SC

Reviews:

Related manuals for RDL-3000 SC

Brands by name

Popular brands

Redline RDL-3000 SC, Installation Manuallines

Search results

Summary of Contents for RDL-3000 SC

Reviews:

Related manuals for RDL-3000 SC

Brands by name

Popular brands