RDL-3000
INSTALLATION GUIDELINES
70-00159-01-06
Proprietary Redline Communications © 2012
Page
37
of 65
kune 12, 2012
recommend silicon seal or glue as these materials are difficult to apply accurately, can
leave gaps, and are difficult to remove. Do not use PVC tape.
1.
Begin to wrap the splicing tape. Start as close to the RDL-3000 body as possible.
Figure 23: Procedures - RF Port - Weatherproofing Pt-1
2.
Stretch and wind the tape back along the connector housing making very sure there
are no gaps in the tape.
Figure 24: Procedures - RF Port - Weatherproofing Pt-2
3.
Continue to wrap the tape tightly along the cable.
Figure 25: Procedures - RF Port - Weatherproofing Pt-3
