24
16.2 CHANGING THE JIGGING SIEVE
1
2
3
4
5
Figure 16
Verti-Top comes with seven different interchangeable meshes for processing the
different types of materials.
Changing the jigging sieve is done as follows
(see Figure 16)
:
Make sure that the Verti-Top is blocked well and cannot move on its
own accord!
1. Open the latches (1) on both sides of the Verti-Top.
2. Open the inspection hatch (2) and block the hatch in the blocking strip (3).
Make sure that the inspection hatch is blocked well and cannot fall
shut on its own accord!
3. Turn the clips (4) a quarter of a turn so that the sieve becomes undone.
4. Remove the sieve (5) and replace this one with another sieve.
5. Turn the clips (4) back so that the sieve is blocked.
6. Take the inspection hatch (2) out of the blocking strip (3).
7. Close the inspection hatch (2) carefully.
BE CAREFUL not to get any parts of your body jammed!
8. Secure the inspection hatch (2) with the latches (1) on both sides of the
machine.
