4
If modifications to the Verti-Top have been made, then the current
CE marking is cancelled. The person that has made these
modifications has to apply for a new CE marking himself.
Check the Verti-Top for loose bolts, nuts and components before
every operation.
If present, check the hydraulic pipelines regularly and replace these
when the hydraulic pipelines are damaged or appear old. The
replacing pipelines should comply with the technical requirements of
the manufacturer.
If present, you should always make the hydraulic installation
pressure-free before working on this installation.
NEVER use the Verti-Top in the absence of protective guards and
safety stickers.
The inspection hatch MUST be closed when using the Verti-Top.
(Figure
2)
Figure 2
Figure 3
BE CAREFUL not to get any parts of your body jammed when
opening the inspection hatch.
(Figure 3)
NEVER crawl under the Verti-Top.
If necessary, tilt the Verti-Top.
NEVER step off the tractor while the motor is running.
In case of maintenance, adjusting and repairs, it is necessary to block
the Verti-Top in order to prevent sinking away, driving off and/or
sliding off.
Always switch off the tractor motor, take the tractor’s key out off
the ignition and disconnect the PTO in case of maintenance,
adjusting and repairs.
(Figure 4)
Figure 4
