14
1
4
2
3
5
6
Figure 12
6.0 ADJUSTING THE WORKING DEPTH OF THE BRUSH
The working depth of the brush can be adjusted by adjusting the front roller by turning the
spindles at the front side of the machine.
The procedure is as follows
(see Figure 12)
:
Make sure that the tractor/Verti-Top is blocked well and cannot move on its
own accord!
Switch off the tractor before descending!
1. Unscrew the bolts (1) a few turns on both sides of the machine.
A set of keys is supplied with the machine; these are located in the
toolbox (4).
2. Adjust the spindles (2) using the supplied keys in order to adjust the working
depth.
3. Set both sides of the machine at the same height so that it is possible to
clean the field evenly. For this purpose, use the indication stickers (3).
4. Screw the bolts (1) on both sides of the machine tight.
NEVER adjust the machine in such a way that it could damage the subsoil.
IMPORTANT!
First check the working depth on the subsoil statically before using the machine!
Experience shows that the machine adjustment for top-layer cleaning is best if the
brush hairs just don’t touch the grass fibres.
