RED LOGIKA 25, Installation Manual

Page: 40 / 80

38
a
a
b
y
c
c
c
c
a
a
b
y
38
6 - INSTALLATION AND ASSEMBLY OF BOILER
The two doors and brackets in the Easyclean kit are pre-assembled in the interest of ease. They need to be disassembled, however, to make
them easier to install. Take the two side brackets “ a ” and fasten them onto the structure of the boiler with the screws provided in the kit
using the top and bottom holes (spanner 17).
Take the central support “ b ” and fitting “ y ” and fasten these onto the structure of the boiler.
After assembling all the brackets, take the doors “ c ”, put them on the protruding bolts of the auger and fasten them back on the brackets
applying slight pressure towards the boiler in order to counteract the resistance of the gasket.
Take the gaskets “ j ” and insert them in the auger to the back of the doors.