CTRL (RS-232 CONTROL)
The CTRL port is located on the back of the
KOMODO Expander Module
.
Connect to this port to provide communication between the camera and external devices.
SPECIFICATIONS
The 4-Pin 00B CTRL Connector supports RS-232 remote control for 3D camera communication and third-party
metadata ingest applications.
The General Purpose Out (GPO) tally presents 3.3 V at a maximum of 0.04 A between pins 1 and 3. When used as a
record tally, the rising edge of the pulse indicates the start of record, and the falling edge represents the end of record.
For more information about controlling the camera using RS-232, download the
R.C.P.™ SDK
, available at
www.red.com/developers
.
Figure: Front Face of CTRL Port (looking at the back of the
KOMODO Expander Module
)
ODU 00B 4-PIN CONNECTOR
PIN SIGNAL
DESCRIPTION
DIRECTION
1
GROUND
Common ground
N/A
2
232 RX
RS-232 receive
In
3
SS/GPO
Shutter sync and general purpose output
Out
4
232 TX
RS-232 transmit
Out
COPYR IGHT © 2 0 2 0 R E D.COM , LLC
9 5 5 -0 1 9 0 , R E V -B E TA 1 .0 | 1 5 3
KOMODO OPERATION GUIDE
BETA
