DC-INPUT
The DC-IN port is located on the back of the camera body.
Connect the 2-pin 0B ODU DC power Adaptor plug to this port to provide the camera with continuous DC power. The
RED power Adaptor provides DC power to operate the camera and to recharge the attached
Batteries
.
NOTE:
The camera cannot charge batteries while it is turned on.
SPECIFICATIONS
The 2-Pin 0B connector accepts unregulated (+) 7 to 17 Volts (V) Direct Current (DC) power. Power consumption for the
camera alone is approximately 27 Watts.
Figure: Front Face of DC-IN Port (looking at the back of the camera)
ODU 0B 2-PIN CONNECTOR
PIN SIGNAL
DESCRIPTION
DIRECTION
1
7 to 17 Volts DC
Power to the camera and batteries
In
2
GROUND
Common ground
N/A
COPYR IGHT © 2 0 2 0 R E D.COM , LLC
9 5 5 -0 1 9 0 , R E V -B E TA 1 .0 | 1 5 2
KOMODO OPERATION GUIDE
BETA
