FLUT
Floating Point Lookup Table (FLUT) is an exposure control exclusive to RED. FLUT works like a traditional ISO
setting, but can be fine-tuned in post production to any level of exposure precision. FLUT automatically protects
highlights and shadows, even when changed substantially.
The FLUT setting is expressed in terms of relative exposure value (EV), where each unit represents a 1-stop change in
midtone exposure level. Range is –8.0 to 8.0. Default is 0.0.
SHADOW
Shadow adjusts the toe value of the FLUT (the tone near black). Increasing the Shadow value raises the video level of
near blacks. Lowering the Shadow value crushes the video level of near blacks. Range is –2.0 to 2.0. Default is 0.0.
SHARPNESS
Control the sharpness of each monitor output. Move to the left for a sharper image; move to the right for a less sharp
image.
CURVES
Define the individual curves for the Luma, Red, Green, and Blue channels. You can only adjust one (1) curve at a time.
Select
Reset Curve
to reset a curve.
NOTE:
Luma is the only channel on Monochrome cameras.
VIDEO
Use the Video menus to adjust the color space and gamma space for the monitor outputs. All settings in the Video
menus affect metadata only, and can be changed in REDCINE-X PRO
®
.
NOTE:
Selecting options in the Video menu may make the menu lighter or darker. The camera applies the color and
gamma spaces after rendering the user interface, so changing these settings affects the user interface.
NOTE:
RED recommends using the most recently released Color Space and Graded Gamma settings. Use legacy
settings (such as REDcolor2) only if you need to record footage to match footage that you recorded with that legacy
setting.
VIDEO SOURCE
1. Select a source from the
Video Source
drop-down menu:
Graded
: Select this to choose a color space and graded gamma space.
Graded (ACES)
: Select this to output a graded ACES proxy.
Graded (ACEScc)
: Select this to output a graded ACEScc proxy.
RLF
: Select this to output REDLogFilm. Then choose a color space and graded gamma space. Selecting RLF
allows you to apply a neutral look to recorded files, while applying a graded look to monitors.
LOG3G12
: Select this to output LOG3G12. Then choose a color space and graded gamma space.
ACES
: Select this to output a graded ACES proxy. Then choose a graded gamma space. Selecting ACES
allows you to apply a neutral look to recorded files, while applying a graded look to monitors.
ACEScc
: Select this to output a graded ACEScc proxy. Then choose a graded gamma space.
2.
Graded, RLF
: Select a color space from the
Color Space
drop-down menu.
3.
Graded, RLF, ACES
: Select a graded gamma space from the
Graded Gamma Space
drop-down menu.
C O PYR I G HT © 2 0 1 6 R ED.C O M , I NC
9 5 5 - 0 0 2 0 _V 6 .3 , R EV - F
|
9 6
EPIC/SCARLET OPERATION GUIDE
