NOTE:
If the REDMOTE does not connect to the Windows computer, download the
file from
, open the
read_me_redmote_vX.X.XX file
, and follow the instructions to manually set up
the network connection. For additional assistance, contact
UPGRADE REDMOTE FIRMWARE (WINDOWS)
1. Download the
, available at
2. Uncompress the zip file.
3. Open the
REDMOTE_Firmware_vX.X.XX
folder.
4. Click
Select File
in
REDMOTE Upgrade Utility
.
5. Go to the
redmote.1.bin
file located in the
REDMOTE_Firmware_vX.X.XX
folder and click
Open
.
“Selected File: redmote.1.bin” displays.
6. Click
Start Upgrade
.
When the file transfer is complete, the REDMOTE displays “Firmware Upgrade Successfully Done”.
7. Click
OK
.
8. Click
Disconnect
to close the REDMOTE Upgrade Utility.
The REDMOTE reboots.
After the upgrade is complete, the REDMOTE displays “POWER UP” and then “SEARCHING”.
9. Select
Cancel
.
10. On the REDMOTE, go to
Setup
>
Setup System
and verify the current REDMOTE firmware version.
REDMOTE upgrade is complete.
11. You may need to re-pair the REDMOTE with the camera after upgrading firmware. For more information, go to
"Pair the REDMOTE" on page 163
.
NOTE:
Review the r
ead_me_redmote_vX.X.XX
instructions contained in the
REDMOTE_vX.X.XX.zip
file.
C O PYR I G HT © 2 0 1 6 R ED.C O M , I NC
9 5 5 - 0 0 2 0 _V 6 .3 , R EV - F
|
1 6 9
EPIC/SCARLET OPERATION GUIDE