3. Rotate the module down flush with the rear of the adaptor module.
Figure: Press Module Flush
4. Apply pressure and use a T20 TORX driver to rotate the lock on the adaptor module clockwise to the
Lock
position.
REMOVE A DSMC POWER MODULE
REQUIRED TOOL(S):
T20 TORX driver
1. Turn off the camera.
2. Use a T20 TORX driver to rotate the lock on the adaptor module counterclockwise to the
Unlock
position.
3. Rotate the module upwards and away from the adaptor module to disengage.
4. Remove the module.
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 3 8 , R EV - AD
|
3 2
RED DSMC POWER OPERATION GUIDE
