REDVOLT XL MODULE
Figure: REDVOLT XL Module
The REDVOLT XL Module provides flexible mounting and power solutions for the EPIC/SCARLET. The reversible
switch plate on the REDVOLT XL Module enables you to mount the module to the EPIC/SCARLET or another module.
When the module is attached to the EPIC/SCARLET, a connected REDVOLT XL battery powers the system. Batteries
can also be hot-swapped, as long as power is provided from a REDVOLT-equipped DSMC Side Handle or a DSMC
AC Power Adaptor is connected to the DC IN port on the EPIC/SCARLET. The on-board 2-pin 0B AUX port provides
a convenient 3.8 A power source for additional camera accessories.
A protective baseplate is included with the REDVOLT XL Module to serve as a portable and stand-alone battery
charger. The module is capable of charging a REDVOLT XL battery while connected to the EPIC/SCARLET, as long as
it is turned off.
WARNING:
DO NOT attempt to power a third-party device without first verifying the cabling and connections are
correct, since that may cause damage. Damage to the device, this module, or other components of the camera
system caused by attempting to power a third-party device incorrectly may not be covered under warranty.
NOTE:
The REDVOLT XL Module ONLY supports REDVOLT XL batteries. DO NOT use a REDVOLT battery.
NOTE:
The REDVOLT XL Module requires that your camera is on firmware v5.1.29 or later.
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 3 8 , R EV - AD
|
3 6
RED DSMC POWER OPERATION GUIDE
