SAFETY INSTRUCTIONS
DO NOT use near water. Avoid exposing to moisture. The unit is
not waterproof, so contact with water could cause permanent
damage to the unit as well as electric shock and serious injury to
the user. DO NOT use in the rain or under other conditions with
high moisture without appropriate protection, and immediately
remove power source if exposed to moisture.
WARNING:
To reduce the risk of fire or electric
shock, do not expose to rain or moisture.
DO NOT expose to excessive vibration or impact (shock). Be
careful not to drop. Internal mechanisms may be damaged by
severe shock.
Clean only using a dry cloth. When cleaning, remember that it is
not waterproof and moisture can damage electronic circuitry. DO
NOT rinse or immerse, keep dry at all times. DO NOT use soaps,
detergents, ammonia, alkaline cleaners, and abrasive cleaning
compounds or solvents. These substances may damage lens
coatings and electronic circuitry.
CAUTION:
Proper ventilation requires a minimum
1/2" (1.25 cm) clearance between ventilation
openings and external surfaces. Verify that
objects that can block the fan intake and exhaust
ports do not impede airflow. Failure to permit
adequate airflow may result in overheating of the
camera, degraded operation and in extreme
situations, damage to the camera.
DO NOT operate or store near any heat sources such as
radiators, heat registers, stoves, or any other apparatus that
produce heat. Store in a protected, level and ventilated place.
Avoid exposure to temperature extremes, damp, severe vibration,
strong magnetic fields, direct sunlight or local heat sources during
storage. Remove any batteries from the camera before storage.
Recommended storage and usage temperatures are:
Operating range: 0°C to 40°C (32°F to 104°F)
Storage range: –20°C to 50°C (–4°F to 122°F)
If there are any performance issues when operating within this
temperature range, please file a support ticket at
Modules and expanders, expanders, and lens mounts are NOT
HOT SWAPPABLE, meaning you cannot remove or install these
items while the camera is turned on. Before installing or removing
these items, you MUST turn off the camera. Failure to do so may
result in damage to the item or camera that is not covered under
warranty.
Do not bypass the third prong of the grounding-type plug on the
power cord of the DSMC AC Power Adaptor. A grounding-type
plug has two blades and a third “grounding” prong. The third
prong is provided for your safety. A grounding-type plug shall be
connected to an outlet with a protective earthen connection. If the
grounding-type plug does not fit into your outlet, do not attempt to
modify the plug or outlet, consult a qualified electrician.
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 3 8 , R EV - AD
|
5
RED DSMC POWER OPERATION GUIDE
Protect all power cords from being pinched, walked on or driven
over by a vehicle. Replace any power cords suspected of
sustaining damage due to crushing or other forms of damage.
Products marked with this symbol are class 2
devices. These devices are not provided with a
grounding type plug.
CAUTION:
The power cord plug for the DSMC
AC Power Adaptor is used as the power
disconnect. To disconnect all power from the
DSMC AC Power Adaptor, unplug the power cord
plug from the wall outlet. During use, the power
cord plug should remain easily accessible at all
times.
Lithium-ion batteries may be subject to special handling
requirements pursuant to federal and local laws. Please refer to
specific shipping instructions included with your battery regarding
proper transport of your battery. Do not handle your battery if it is
damaged or leaking. Disposal of batteries must be in accordance
with local environmental regulations. For example, California law
requires that all rechargeable batteries must be recycled by an
authorized recycle center. Storing batteries fully charged or in
high temperature conditions may permanently reduce the life of
the battery. Available battery capacity may also be temporarily
lessened after storage in low temperature conditions.
WARNING:
DO NOT expose the battery to
excessive heat.
WARNING:
Danger of explosion if an incorrect
battery is charged or used to power the camera
and accessories. Replace only with the same or
equivalent type battery.
CAUTION:
Refer all service and repair to
qualified RED service personnel. To reduce the
risk of electric shock, and damage to the
camera or accessories, DO NOT attempt to
perform any servicing other than any procedures
that are recommended in the operating
instructions.
INDOOR USE ONLY:
Products marked with this
symbol are designed for use indoors only.
