QUICKPLATE MODULE CONNECTORS
The Quickplate Module is designed with two (2) industry-standard 2-pin 0B AUX ports to power camera accessories
when shooting. The two (2) auxiliary connectors provide a maximum combined output of 3.8 A. For example, if one (1)
port is drawing 2 A, the other can provide up to 1.8 A.
NOTE:
Align the key and red mark on the AUX port with the key on the cable connector to connect.
Figure: Front Face of Quickplate Module AUX Connector
2-PIN 0B LEMO AUX CONNECTORS
PIN
SIGNAL
DESCRIPTION
DIRECTION
1
GROUND
Common ground
N/A
2
+11.5 to +17 VDC
+11.5 to 17 VDC unregulated battery pass-through
power
Out
NOTE:
Mating connector is EEG.0B.302.CLL.
ATTACH THE QUICKPLATE MODULE
Figure: Quickplate Module Attached to Camera
The Quickplate Module attaches to a Module Adaptor or +1 Adaptor Module in the same way that other DSMC
modules attach. For more information, go to
"EPIC/SCARLET Power Module Operations" on page 31
.
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 3 8 , R EV - AD
|
4 3
RED DSMC POWER OPERATION GUIDE
