DSMC2 REDVOLT XL MODULE
Figure: DSMC2 REDVOLT XL Module
The DSMC2 REDVOLT XL Module mounts seamlessly to the back of the WEAPON, SCARLET-W, RAVEN, or EPIC-
W—and select other I/O expanders—to provide support for long-lasting and rechargeable REDVOLT XL batteries. The
DSMC2 REDVOLT XL Module features a smaller, more ergonomic design compared to the REDVOLT XL Module with
one (1) dual-action release button for removing an attached battery.
The DSMC2 REDVOLT XL Module offers a DC IN power port that can be used to power the camera system when the
module is attached to the BRAIN. An included protective baseplate enables the DSMC2 REDVOLT XL Module to serve
as a portable and stand-alone REDVOLT XL battery charger. Plug in the DSMC AC Power Adaptor to the 6-pin 1B
LEMO
®
DC IN connector on the module and connect a REDVOLT XL battery. While the module is mounted to the
BRAIN, it only charges an attached REDVOLT XL battery if the BRAIN is powered off.
Two (2) rear facing auxiliary ports provide power for external camera accessories, while remaining out of your way
while shooting.
WARNING:
DO NOT attempt to power a third-party device without first verifying the cabling and connections are
correct, since that may cause damage. Damage to the device, this module, or other components of the camera
system caused by attempting to power a third-party device incorrectly may not be covered under warranty.
NOTE:
The DSMC2 REDVOLT XL Module ONLY supports REDVOLT XL batteries. DO NOT use a REDVOLT battery.
INSERT A REDVOLT XL
1. Align and insert the REDVOLT XL.
2. Apply pressure to the REDVOLT XL until a click is heard, signalling the battery is properly seated.
REMOVE A REDVOLT XL
1. Press the
Eject
button on top of the DSMC2 REDVOLT XL Module.
2. Remove the REDVOLT XL.
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 3 8 , R EV - AD
|
4 8
RED DSMC POWER OPERATION GUIDE
