EPIC/SCARLET ADAPTOR OPERATIONS
This section describes the installation and removal of EPIC/SCARLET module adaptors.
INSTALL THE +1 ADAPTOR MODULE
REQUIRED TOOL(S):
T20 TORX
®
driver
1. Turn off the camera.
2. Remove the REDMOTE, if attached.
3. Position the +1 Adaptor Module over the V-mount on the rear of the BRAIN.
Figure: Install the +1 Module Adaptor
4. Insert the HDMI connector into the
HDMI
port on the BRAIN.
Figure: Insert the HDMI Connector to the BRAIN
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 3 8 , R EV - AD
|
2 9
RED DSMC POWER OPERATION GUIDE
