Red Hat DIRECTORY SERVER 8.0 Administration Manual Download Page 477

Page: 477 / 552

Synchronizing Users

459

Figure 19.5. Setting User Attributes

Additional

ntUser

attributes can be created either by using the

Advanced

button in the Console or by

using

ldapmodify

; see

Section 2.2.4.2, “Modifying Entries Using ldapmodify”

Table 19.1, “User Schema Mapped between Directory Server and Active Directory”

shows the

attributes that are mapped between the Directory Server and Windows servers, and

Table 19.2, “User

Schema That Are the Same in Directory Server and Windows Servers”

shows the attributes that are

the same between the Directory Server and Windows servers. For more information on the interaction
between Directory Server and Windows schema, see

Section 19.4, “Schema Differences”

Directory Server

Active Directory

name

ntUserDomainId

sAMAccountName

ntUserHomeDir

homeDirectory

ntUserScriptPath

scriptPath

ntUserLastLogon

lastLogon

ntUserLastLogoff

lastLogoff

ntUserAcctExpires

accountExpires

ntUserCodePage

codePage

ntUserLogonHours

logonHours

ntUserMaxStorage

maxStorage

Summary of Contents for DIRECTORY SERVER 8.0









































































































































































































































































































































































































































































































































































Red Hat DIRECTORY SERVER 8.0, Administration Manual, Page: 477 / 552

Search results

Summary of Contents for DIRECTORY SERVER 8.0

Reviews: