manualshive.com logo in svg

Red Hat DIRECTORY SERVER 8.0, Administration Manual, Page: 150 / 552

Share
Download
Red Hat DIRECTORY SERVER 8.0 Administration Manual Download Page 150

Chapter 5. Managing Entries with Roles, Classes of Service, and Views

132

template entry already exists and is used for something else, such as a user entry, the

LDAPsubentry

 object class does not need to be added to the template entry.

The CoS template entry also contains the attribute generated by the CoS (as specified in the

cosAttribute

 attribute of the CoS definition entry) and the value for that attribute.

For example, a CoS template entry that provides a value for the 

postalCode

 attribute follows:

dn:cn=exampleUS,ou=data,dc=example,dc=com
objectclass: top
objectclass: extensibleObject
objectclass: cosTemplate
postalCode: 44438

The following sections provide examples of template entries along with examples of each type of CoS
definition entry.

•

Section 5.2.3.3, “Example of a Pointer CoS”

•

Section 5.2.3.4, “Example of an Indirect CoS”

•

Section 5.2.3.5, “Example of a Classic CoS”

5.2.3.3. Example of a Pointer CoS

Example Corporation's administrator is creating a pointer CoS that shares a common postal code with
all entries in the 

dc=example,dc=com

 tree.

1. Add a new pointer CoS definition entry to the 

dc=example,dc=com

 suffix using 

ldapmodify

:

ldapmodify -a -D "cn=directory manager" -w secret -h host -p 389

The 

ldapmodify

 utility binds to the server and prepares it to add information to the configuration

file.

2. Next, add the pointer CoS definition to the 

dc=example,dc=com

 root suffix.

dn: cn=pointerCoS,dc=example,dc=com
objectclass: top
objectclass: cosSuperDefinition
objectclass: cosPointerDefinition
cosTemplateDn: cn=exampleUS,ou=data,dc=example,dc=com
cosAttribute: postalCode

3. Create the template entry.

dn: cn=exampleUS,ou=data,dc=example,dc=com
objectclass: top
objectclass: extensibleObject
objectclass: cosTemplate
postalCode: 44438

The CoS template entry (

cn=exampleUS,ou=data,dc=example,dc=com

) supplies the value

stored in its 

postalCode

 attribute to any entries located under the 

dc=example,dc=com

 suffix.

These entries are the target entries.

Summary of Contents for DIRECTORY SERVER 8.0









































































































































































































































































































































































































































































































































































Reviews:

No comments