Red Hat DIRECTORY SERVER 8.0, Administration Manual, Page: 254 / 552

Chapter 8. Managing Replication
236
dn: cn=replication manager,cn=config
objectClass: inetorgperson
objectClass: person
objectClass: top
cn: replication manager
sn: RM
userPassword: password
passwordExpirationTime: 20380119031407Z
Example 8.1. Example Supplier Bind DN Entry
When configuring a replica as a consumer, use the DN of this entry to define the supplier bind DN.
8.4. Configuring Single-Master Replication
To set up single-master replication such as the configuration shown in
Figure 8.1, “Single-Master
Replication”
, between supplier Server A, which holds a read-write replica, and the two consumers
Server B and Server C, which each hold a read-only replica, there are two major steps:
•
Section 8.4.1, “Configuring the Read-Write Replica on the Supplier Server”
•
Section 8.4.2, “Configuring the Read-Only Replica on the Consumer”
•
Section 8.4.3, “Create the Replication Agreement”
8.4.1. Configuring the Read-Write Replica on the Supplier Server
1. Specify the supplier settings for the server.
a. In the Directory Server Console, select the
Configuration
tab.
b. In the navigation tree, select the
Replication
folder.
c. In the right-hand side of the window, select the
Supplier Settings
tab.