manualshive.com logo in svg

Red Hat DIRECTORY SERVER 8.0, Administration Manual, Page: 223 / 552

Share
Download
Red Hat DIRECTORY SERVER 8.0 Administration Manual Download Page 223

Access Control and Replication

205

The Directory Server then evaluates the ACI according to the normal ACI evaluation algorithm.

When an attribute is multi-valued, each value is used to expand the macro, and the first one that
provides a successful match is used. For example:

dn: cn=Jane Doe,ou=People,dc=HostedCompany1,dc=example,dc=com 
cn: Jane Doe 
sn: Doe 
ou: Engineering, dc=HostedCompany1,dc=example,dc=com
ou: People, dc=HostedCompany1,dc=example,dc=com...

In this case, when the Directory Server evaluates the ACI, it performs a logical OR on the following
expanded expressions:

roledn = "ldap:///cn=DomainAdmins,ou=Engineering,dc=HostedCompany1,dc=example,dc=com"

roledn = "ldap:///cn=DomainAdmins,ou=People,dc=HostedCompany1,dc=example,dc=com"

6.11. Access Control and Replication

ACIs are stored as attributes of entries;therefore, if an entry containing ACIs is part of a replicated
database, the ACIs are replicated like any other attribute.

ACIs are always evaluated on the Directory Server that services the incoming LDAP requests. This
means that when a consumer server receives an update request, it returns a referral to the supplier
server before evaluating whether the request can be serviced on the supplier.

6.12. Compatibility with Earlier Releases

Some ACI keywords that were used in earlier releases of Directory Server have been deprecated.
However, for reasons of backward compatibility, the following keywords are still supported:

• userdnattr

• groupdnattr

Therefore, if you have set up a replication agreement between a legacy supplier server and a version
8.0 consumer, there should not be any problems in the replication of ACIs.

Summary of Contents for DIRECTORY SERVER 8.0









































































































































































































































































































































































































































































































































































Reviews:

No comments