Chapter 8. Managing Replication
260
e. In the
Common Settings
section, specify a purge delay in the
Purge delay
field.
The purge delay is how often the state information stored in the replicated entries is deleted.
f.
Click
Save
.
After setting up the supplier replica, begin configuring the replication agreements.
8.6.2. Configuring the Read-Only Replica on the Consumer Server
1. Create the database for the read-only replica if it does not exist. See
Section 3.1.1, “Creating
Suffixes”
for instructions on creating suffixes.
2. Create the entry for the supplier bind DN on the consumer server if it does not exist. The supplier
bind DN is the special entry that the supplier will use to bind to the consumer. This is described in
Section 8.3, “Creating the Supplier Bind DN Entry”
.
3. Specify the replication settings required for a read-only replica.
a. In the Directory Server Console, select the
Configuration
tab.
b. In the navigation tree, expand the
Replication
folder, and highlight the replica database.
The
Replica Settings
tab for that database opens in the right-hand side of the window.
Summary of Contents for DIRECTORY SERVER 8.0
