Malfunctions
8
BAL_S20_EN_1V0_REC_121-006454590
29/ 33
Control unit BDE-D does not react
If the control panel does not react when the keys are pressed or if no message appears on the dis-
play, a reset of the control panel could eliminate the problem.
Proceed as follows:
RESET HARDWARE BDE-D
Press E key > 12 seconds
Display without any message
Connecting to control unit....
Connection has been established (example)
▪
After resetting, the control panel is again operational
▪
If this is not the case, please inform our service centre
Manual opening (without manual release)
Initial position:
door is blocked and locked in closed position in de-energised state
▪
Opening the drive fairing and cover plates (unscrewing)
Note:
Only open the cover plates in the middle to get to the locking mechanism.
▪
To be on the safe side, unplug the power cord from the wall outlet.
▪
The socket outlet is located under the drive fairing.
▪
In addition, unscrew the battery fuse(s).
▪
The battery is located under the drive fairing.
▪
Actuate the release lever clockwise as far as it
will go and then let it recoil.
▪
The door unlocks and can be pushed open by
hand.
▪
Close the drive fairing and cover plates again.
8.1.4
8.2
