RECO HX2 Series, Nstallation, Operation And Maintenance Manual

Page: 8 / 40

S
ECTION
1 - I
NTRODUCTION
HX2 S
ERIES
1 - 6
1.8 HX2 Configuration and Ordering Code
The following Configuration and Ordering Code defines the HX2 and can be found on the
unit nameplate. When inquiring about a HX2 this code must be used. Doing so enables
us to handle requests quicker and assure the correct unit is being discussed.
1.8a Sample Selection:
The selected unit is a RECO USA HX2 series water heater model HX2-H-0836-SS-CU-
DW - M horizontal water heater with 8 ” diameter x 36 ” long heating element, 316L
stainless steel tank, ¾” copper double-wall tubes, and standard Modbus ® communication
interface with the building automation system.
- - - - CU - -
Heater Series BAS Interface
HX2 Series Water Heater ⚫ M - Modbus
A - BACnet IP
B - BACnet MS/TP
Orientation
H - Horizontal
V- Vertical
Heater Tube Style
⚫ DW - Double wall - ¾"
SW - Single wall -½"
Heater Size (Nominal)
06030 - 6" D x 30" L
06036 - 6" D x 36" L
Tube Material
⚫ CU - Copper
08030 - 8" D x 30" L XX - Other
08036 - 8" D x 36" L
10030 - 10" D x 30" L Tank/Shell Material
10036 - 10" D x 36" L ⚫ SS - 316L stainless steel
CN- Copper-Nickel
12030 - 12" D x 30" L XX - Other
12036 - 12" D x 36" L
⚫ Denotes standard configuration
M 08036 DW HX2 H SS