IOM
A
PPENDIX
1-
T
HE
C
ONTROL
P
ANEL
HX2
S
ERIES
A - 6
Step 5
–
Press
ENTER
to bring up the
HIGHTEMPALARM
setpoint and dead band options.
Press
ENTER
on the highlighted item to bring up the adjustment screen.
Step 6 - Adjust
UP
or
DOWN
and press
ENTER
. Use the
HOME
,
BACK
, or
GO TO
menu buttons to return to the Main Menu.
Note that the
HIGH TEMP ALARM
setting is a secondary temperature control
switch. When reached it will log the event, and will automatically reset when
the temperature reaches
HIGHTEMPALARM SP
–
HIGHTEMPALARM DB.
These same conventions are used throughout the controller for navigating
menus and adjusting settings. Use the
HOME
,
BACK
, or
GOTO
menu buttons
to return to the Main Menu.
A.5 Alarm Menu
If there is an active alarm condition the red LED in the ALARM button will flash.
Step 1 - Scroll to the
ALARM HISTORY
and press
ENTER
to display the fault history.
Summary of Contents for HX2 Series
