RECK MOTOmed gracile12 Instruction Manual Download

Page: 35 / 106

TRAINING PREARRANGEMENTS

Pedal radius adjustment (2 levels)*

The pedal radius can be decreased (3.5 cm / 1.4 in.) and increased
(7 cm / 2.8 in.) with an Allen key within seconds.
The following adjustments are available:

Leg trainer

only

viva2, viva2 light, viva2 Parkinson

gracile12

letto2

MOTOmed letto2 leg/arm

viva2 stativ

MOTOmed models

7 cm / 12,5 cm

2.8 in. / 5 in.

3,5 cm / 7 cm

1.4 in. / 2.8 in.

7 cm

8 in.

7 cm

2.8 in.

–

Arm-/upper

body trainer

10 cm

4 in.

3,5 cm / 7 cm

1.4 in. / 2.8 in.

–

7 cm

2.8 in.

10 cm

4 in.

Adjustment of the pedal radius

(Only with leg trainer viva2, viva2 light, viva2 Parkinson and leg and
arm/upper body trainer gracile12)

The MOTOmed must be switched off and the feet must not be

inserted when changing the pedal radius.

1. Open the Allen screw at the ball bearing.
2. Remove the (pediatric) safety foot shell from the current hole in

the pedal crank and the black plastic cover above the free hole.

3. Set the pediatric foot shell into the open hole of the pedal crank.

fig. 24

Large pedal radius
12,5 cm / 5 in.

Small pedal radius
7,0 cm / 2.8 in.

MOTOmed viva2 / viva2 light /
viva2 Parkinson

Large pedal radius
7,0 cm / 2.8 in.

MOTOmed gracile12

Small pedal radius
3,5 cm / 1.4 in.

fig. 25/

Summary of Contents for MOTOmed gracile12











































































































Search results

Summary of Contents for MOTOmed gracile12

Reviews:

Related manuals for MOTOmed gracile12

Brands by name

Popular brands

RECK MOTOmed gracile12, Instruction Manual

Search results

Summary of Contents for MOTOmed gracile12

Reviews:

Related manuals for MOTOmed gracile12

Brands by name

Popular brands