29
SETUP, TRANSPORT
Prior to every training, a visual inspection needs to be performed
on the MOTOmed in order to avoid accidents. If the user is not
in the condition to conduct the inspection, it is the care giver‘s
responsibility to do so.
Additional instructions for the visual inspection can be found in
chapter 12.
Operating panel
Connection points of the operating panel
The following connectors can be found in the operating panel:
* The serial interface can be used for the following purposes only:
- With FES devices of the Hasomed company, which are designed to
be combined with the MOTOmed.
- As connection point for the MOTOmed interface for games.
fig. 16
1
2
3
Loose Allen key
Attach TrainCare and
tighten Allen screw
Detach TrainCare and
rotate about 180°
180°
page 87
fig. 17
Chip card reader
(accessory, not available for MOTOmed viva2 light)
Connection point for operator
remote control (back side)
(only available for letto2 / letto2 leg/arm)
Serial interface*
(accessory, not available for MOTOmed viva2 light)
Interface for pulse meter
(accessory, not available for MOTOmed viva2 light)
page 73
3
