43
TRAINING PREARRANGEMENTS
Proper positioning of the MOTOmed letto2 leg/arm:
The rotary arm
3
should be positioned centrally to the bed (width). If used from a
bed side, the MOTOmed can be adapted to the bed width by means of
the star knob. For this purpose loosen
the star knob
9
, extend the arm
length accordingly and tighten the star
knob
9
again.
High stability by ground fixation:
The ground fixation can be locked
by pushing the red part of the foot pedal
5
(fig. 30). This ensures
high stability, even during active training. To release the ground
fixation push the green part of the foot pedal
6
(fig. 30).
Adjustment of the training height:
At the minimum height please
ensure that the foot shells
1
(fig. 40) do not abrade the mattress
when in its lowest position. Slightly lift the pedal
8
(fig. 3) in order
to lower the rotary arm. Securely tighten the screw knob after the
adjustment
7
(fig. 39).
During height adjustment you must not touch or come close to the
hydraulic cylinder. During the training, you shouldn't use the electrical
or manual height adjustment of the bed unit.
Positioning of the feet into the safety foot shells:
Put the feet into
the safety foot shells
1
and if
available into the calf shells
of the
leg guides
»TrainCare comfort«
(accessory, item no. 168.000)
and fix
these with the hook and loop straps
12
.
9
6
fig. 40
page 39
12
fig. 41
page 55
4
