44
TRAINING PREARRANGEMENTS
Knee bending adjustment:
With the knee bending adjustment using
the thumb wheel
6
you can readjust
the knee inflection even while training.
Please ensure the knee joints of the
user are slightly bent at all times during
the training (when in the farthest foot
shell position).
Pivoted operating panel incl. mit remote stop for patients:
Rotate
the operating panel
13
towards the
user and give him the operator remote
stop
14
. Pay attention that the cable
does not come near the foot shells. The
user can also regulate the training
independently with the accessory
pivot arm for the operating panel
(accessory, item no. 166.000).
Preparation arm/upper body training:
For arm/upper body training,
the MOTOmed letto2 leg/arm
should be positioned to the side of
the bed. Remove the foot shells and
attach the hand grips. The following
operations with the arm/upper body
trainer are identical to the leg
training. After preparation of the
arm/upper body trainer (attaching
the handles, proper positioning and fixation of the MOTOmed) induce
the hands to the handles and fasten them in accordance to applicable
accessories (e.g.
wrist cuffs (item no. 562.000), hook grip (item no.
556.206)
, etc.). Once set up is complete, make sure the user elbows are
always slightly bend (test the position in the farthest pedal position).
fig. 42
13
14
fig. 43
page 58
fig. 44
page 41/42
page 50/51
