48
ACCESSORIES
Lastly, lock it with the operating lever (feel a slight pressure).
Adjusting the spring pressure of the foam roll
The pressure of the foam roll can be adjusted by tightening (counter-
clockwise) or loosening (clockwise) the set screw at the bottom of the
foot holder.
The position of the set screw must not exceed 10 mm / 0.4 in.!
Pedal radius quick adjustment**
With the pedal radius quick adjustment, you are able to adjust the
range of movement/pedal radius of the foot shells. The pedal radius
is adjustable on both sides in four levels and can also be set between
those levels if required.
Please follow these steps when changing the pedal radius:
1. Pull the mains cable to prevent unwanted power-on during the
pedal radius adjustment.
2. Loosen both Allen screws with the Allen key SW 4.
3a. After loosening the Allen screws you can pull the snap knob to set
the foot shells at any one of the 4 positions / levels.
fig. 49/
50
Allen key
SW 5
L
= 0 mm / 0 in. - large pressure
L
= 10 mm / 0.4 in.- small pressure
L
page 26/27
