ReChargx RX411 Instructions Manual Download Page 9

Page: 9 / 15

TonerRefillKits.com

ReChargX

™

RX411

8am - 5pm ET Mon - Fri

V1.00 - 2016.05.03

800.527.3712 or 352.343.7533

Page 9 of 15

Figure 9-4:

After removing the drive gear; before removing the

actuator gear

Figure 9-5:

After removing the actuator gear; before removing

the toner hopper plug

Figure 9-6:

Removing the toner hopper plug

Step 9c: Remove the drive gear

With the reset gear out of the way, we will now

remove the drive gear (A) from the cartridge gear

train (Before: Figure 9-3; After: Figure 9-4).

Step 9d: Remove the actuator gear

With the drive gear removed, we will now remove

the actuator gear (B) (Before: Figure 9-4; After:

Figure 9-5).

Step 9e: Remove the toner hopper plug

With the reset spring and the reset, drive and

actuator gears out of the way, we will now remove

the toner hopper plug (E) (Figure 9-6).

Wedge the tip of a flat-blade screwdriver between the

lip of the toner hopper opening and the toner hopper

plug. Then pry the plug up and out.

Now that we have removed the spring, gears, and

toner hopper plug,

proceed to

page 10

to continue

the process.

Summary of Contents for RX411
















Search results

Summary of Contents for RX411

Reviews:

Related manuals for RX411

Brands by name

Popular brands

ReChargx RX411, Instructions Manual

Search results

Summary of Contents for RX411

Reviews:

Related manuals for RX411

Brands by name

Popular brands