ReChargx RX411 Instructions Manual Download Page 8

Page: 8 / 15

TonerRefillKits.com

ReChargX

™

RX411

8am - 5pm ET Mon - Fri

V1.00 - 2016.05.03

800.527.3712 or 352.343.7533

Page 8 of 15

Figure 9-1:

The high-yield cartridge (end cap removed)

Figure 9-2:

After removing the reset spring; before removing the

reset gear

Figure 9-3:

After removing the reset gear; before removing the

drive gear

Preparing the high-yield cartridge for refilling and resetting

Remove the components

Figure 9-1 shows the gear end of the high-yield toner

cartridge with the end cap removed.

The parts you will be working with are the drive gear

(A), actuator gear (B), reset gear (C), reset spring (D)

and toner hopper plug (E), which is located under the

reset gear and not visible in this view.

Step 9a: Remove the reset spring

To prepare for the resetting we start by removing the

cartridge reset spring (D) (Before: Figure 9-1; After:

Figure 9-2).

Step 9b: Remove the reset gear

With the reset spring removed we will now remove

the reset gear (C) which will expose the toner hopper

plug (Before: Figure 9-2; After: Figure 9-3).

Summary of Contents for RX411
















Search results

Summary of Contents for RX411

Reviews:

Related manuals for RX411

Brands by name

Popular brands

ReChargx RX411, Instructions Manual

Search results

Summary of Contents for RX411

Reviews:

Related manuals for RX411

Brands by name

Popular brands