ReChargX
™
RX411
8am - 5pm ET Mon - Fri
© 1995-2016 ReChargX, EmptyX, TonerRefillKits, TonerRefillKits.com, the TonerRefillKits logo, the
V1.00 - 2016.05.03
800.527.3712 or 352.343.7533
ReChargX and EmptyX logos are trademarks owned by TonerRefillkits.com, LLC. All rights reserved.
Page 7 of 15
Figure 8-4:
After removing the drive gear; before removing the
actuator gear
Figure 8-5:
After removing the actuator gear; before removing
the toner hopper plug
Figure 8-6:
Removing the toner hopper plug
A
B
E
Step 8c: Remove the drive gear
With the reset gear removed, we will now remove
the drive gear (A) from the gear train (Before: Figure
8-3; After: Figure 8-4).
Step 8d: Remove the actuator gear
With the drive gear removed we will now remove the
actuator gear (B) from its post (Before: Figure 8-4;
After: Figure 8-5).
Step 8e: Remove the toner hopper plug
With the drive, reset, and actuator gears out of the
way we now have access to the hopper plug (E).
Wedge the tip of a flat-blade screwdriver between the
lip of the toner hopper opening and the toner hopper
plug. Then pry the plug up and out (Figure 8-6).
Now that we have removed the spring, gears, and
toner hopper plug,
to continue
the refill process.
