ReChargx RX411 Instructions Manual Download Page 14

Page: 14 / 15

TonerRefillKits.com

ReChargX

™

RX411

8am - 5pm ET Mon - Fri

V1.00 - 2016.05.03

800.527.3712 or 352.343.7533

Page 14 of 15

Step 18: Add the reset spring & verify placement

Now that the gear has been installed, place the

spring (D) over the post of the gear (Figure 18).

With the drive gear (A), actuator gear (B), reset gear

(C), reset spring (D) and toner hopper plug (E) (not

shown), installed on the cartridge verify your cartridge

looks the same as Figure 19.

Step 19: Secure the end cap to the cartridge

Now that you have verified the gears and springs

have been added to the cartridge and are in proper

orientation lower the end cap over the gear train and

secure it in place with the two small phillips-head

screws highlighted by the arrows (Figure 20).

Step 20: Remove the protective paper

In the final step of the refilling process carefully

remove the protective paper (Figure 21) and make

certain you do not accidentally touch the developer

roller once the paper has been removed.

Figure 18:

Applying the reset spring

Figure 19:

Final position of the gears and spring

Figure 20:

Securing the end cap to the cartridge

Figure 21:

Removing the protective paper

Summary of Contents for RX411
















Search results

Summary of Contents for RX411

Reviews:

Related manuals for RX411

Brands by name

Popular brands

ReChargx RX411, Instructions Manual

Search results

Summary of Contents for RX411

Reviews:

Related manuals for RX411

Brands by name

Popular brands