ReChargX
™
RX411
8am - 5pm ET Mon - Fri
© 1995-2016 ReChargX, EmptyX, TonerRefillKits, TonerRefillKits.com, the TonerRefillKits logo, the
V1.00 - 2016.05.03
800.527.3712 or 352.343.7533
ReChargX and EmptyX logos are trademarks owned by TonerRefillkits.com, LLC. All rights reserved.
Page 11 of 15
Step 11: Add the ReChargX™ RX411 premium
print toner to the toner hopper
Before starting the toner hopper refilling process
(and after verifying the bottle cap is screwed firmly in
place), gently rock or shake the bottle back-and-forth
several times to ensure the toner will flow smoothly
(the toner can settle and compact during storage).
Remove the original cap from the toner bottle and
attach the clear, plastic dispenser spout from the
ReChargX™ RX411 premium print toner refill kit.
For the easiest, quickest and most mess-free refilling,
tilt the end of the cartridge up with the toner hopper
hole at a 45 degree angle and slowly angle the
dispenser spout on the bottle of toner to meet up
with the hole (Figure 11). Tilting the bottle up a little
more will start the toner flowing into the toner hopper.
Pour the toner slowly.
RESIST ALL TEMPTATION
TO SQUEEZE THE BOTTLE
to increase the flow
of toner. The likelihood of toner escaping under
pressure greatly increases when the bottle is
squeezed while filling the cartridge. If the toner
stops flowing, return the bottle to the upright
position and restart the filling process.
Fill the cartridge until the hopper appears to be full.
Any toner remaining in the bottle can be used at a
later date after you have completed a significant
amount of printing.
Step 12: Activate the toner grabber cloth
Take the orange toner grabber cloth from the
ReChargX™ RX411 premium print toner refill kit and
stretch it along both dimensions; the cloth will stretch
considerably in one dimension and not the other
(Figure 12). Stretching the toner grabber cloth
activates the toner retaining substance embedded
within the cloth which gives it the ability to pick up
and retain toner.
Note
: Only use the toner grabber cloth on the exterior
of the cartridge. Do not use the cloth to clean any of
the internal components or the drum as the toner
grabber will leave a residue on those critical image
production components which will affect the quality of
the print output.
Figure 11:
Adding toner to the toner hopper
Figure 12:
Stretching the “toner grabber” cloth
