ReChargx RX411 Instructions Manual Download Page 6

Page: 6 / 15

TonerRefillKits.com

ReChargX

™

RX411

8am - 5pm ET Mon - Fri

V1.00 - 2016.05.03

800.527.3712 or 352.343.7533

Page 6 of 15

Figure 8-1:

The standard-yield cartridge (end cap removed)

Figure 8-2:

After removing the reset spring; before removing the

reset gear

Figure 8-3:

After removing the reset gear; before removing the

drive gear

Preparing the standard-yield cartridge for refilling and resetting

Remove the components

Figure 8-1 shows the gear end of the standard-yield

toner cartridge with the end cap removed.

The components you will be removing (to be replaced

with the new components which came with the

RX411 toner refill kit to convert your cartridge into a

high-yield cartridge) are the drive gear (A), actuator

gear (B), reset gear (C), reset spring (D) and toner

hopper plug (E), which is located under the reset

gear and not visible in this figure.

Step 8a: Remove the reset spring

To begin the process of converting the standard-yield

into the high-yield, we start by removing the reset

spring (D) (Before: Figure 8-1; After: Figure 8-2).

Step 8b: Remove the reset gear

With the reset spring removed, you may now remove

the black reset gear (C) (Before: Figure 8-2; After:

Figure 8-3) which will expose the toner hopper plug.

Summary of Contents for RX411
















Search results

Summary of Contents for RX411

Reviews:

Related manuals for RX411

Brands by name

Popular brands

ReChargx RX411, Instructions Manual

Search results

Summary of Contents for RX411

Reviews:

Related manuals for RX411

Brands by name

Popular brands