ReChargX
™
RX411
8am - 5pm ET Mon - Fri
© 1995-2016 ReChargX, EmptyX, TonerRefillKits, TonerRefillKits.com, the TonerRefillKits logo, the
V1.00 - 2016.05.03
800.527.3712 or 352.343.7533
ReChargX and EmptyX logos are trademarks owned by TonerRefillkits.com, LLC. All rights reserved.
Page 10 of 15
Figure 10-1:
Inserting cartridge into zip-top bag
Figure 10-2:
Dumping out the remaining toner
Preparing the cartridges for refilling and resetting
Step 10: Remove the remaining toner
Prior to adding “fresh” toner, we must remove the
residual “old” toner.
On the first refill of your toner cartridge, the new toner
should not be combined with whatever quantity of
toner that remains in the hopper.
Failure to remove the remaining toner will result in
splotching, smudging, hazing, and other print defects.
Note
: This step does not need to be performed on
subsequent refills when fresh ReChargX™ toner is
being added to the existing ReChargX™ toner.
Insert the toner hopper opening end of the cartridge
into the plastic zip-top bag which is included in the
ReChargX™ RX411 toner refill kit (Figure 10-1).
Carefully pour out as much of the residual toner as
possible (tapping along the side of the cartridge helps
to keep the toner flowing) (Figure 10-2).
If the toner stops flowing, stand the cartridge upright
(with the toner hopper hole facing up) and then put
the end of the cartridge back into the bag and
continue the emptying process.
With the majority of the toner removed, remove the
cartridge from the bag. Seal the bag and discard it.
