24
6
6. Place the child restraint
on the vehicle seat facing
rearward. Attach each LATCH
connector to the lower
anchors in the vehicle.
7. While pressing down on the
seating surface on the same
side as the adjuster, pull the
loop on the LATCH strap to
tighten.
Repeat as needed until the
child restraint cannot be
moved more than 1 inch (2.5
cm) in any direction at the
belt path.
8. The level line indicator on the
seat base should be level with
the ground when the vehicle
is parked. The backrest
should be at approximately a
45-degree angle.
8
7
REAR-F
ACING - L
A
TCH Installation
