30
REAR-F
ACING - Locking Lap-Shoulder Belt Installation
4. Make sure the seat belt
is not twisted, then buckle the
seat belt. Replace the trim
cover over the front edge of the
seat bottom.
If necessary, switch the
retractor or the latch plate to
the locked mode according
to your vehicle’s owners’s
manual.
5. While pressing on the seating
surface, remove slack from the
shoulder belt.
Repeat as needed until the
child restraint cannot be moved
more than 1 inch (2.5 cm) in
any direction at the belt path.
6. The level line indicator on the
seat base should be level with
the ground, when the vehicle
is parked. Refer to the label on
the side of the base.
4
5
6
