26
Lap Belt Only Installation –
Rear-Facing
Do NOT use this method of installation with an emergency
locking retractor.
• Use ONLY in reclined position when installed
Rear-Facing
.
1. Adjust into the recline
position by pulling the recline
adjust handle and rotating
the seat back. Rotate until
the recline adjust handle
locks into position.
2
1
2. Lift the trim cover and foam
at the front and locate the
Rear-Facing
belt path
(circled in
blue
).
WARNING!
DEATH or SERIOUS INJURY
can occur
3. Place the child restraint
on the vehicle seat facing
rearward. Slide latch plate to
the end of seat belt webbing.
3
REAR-F
ACING - Locking Lap Belt Installation
