- 46 -
Press the "Return" key to return to the Peripheral Setup menu to enter the WiFi Setup interface where you can
input the desired IP, SSID and submask of your WiFi. The device will check the RJ45 is successfully
connected to the external module.
1.
After SSID of the MDVR is set, a corresponding SSID is also required when adding the
appropriate WiFi download point to realize WiFi auto-download;
2.
Other options are set as required and after setting, move your cursor to the "Save" key and
then press the "ENTER" key to save it.
Step 5: Oil Setup
Press the "Return" key to return to the Peripheral Setup menu to enter the Oil Setup interface. This
feature can be enabled only when an external oil level sensor is connected and the enable
feature is on. Coefficient = total capacity of the oil tank (X) /height (mm) *100%
Select as required
The WiFi auto-download server
checks if WiFi connection is
used via this SSID.