- 26 -
1.
Preview of videos on the screen; you can set date&time, speed, HDD temperature, vehicle
number, IO alarm state, and GPS information to on or off during video encoding or screen
display.
2.
Select PAL/NTSC for the output format as required and after setting, move your cursor to the
"Save" key and then press the "ENTER" key to save it.
2.
Channel Mode
Press the "Return" key twice to return to the setup menu and select Channel Mode where you can
select different channel modes depending on the model you use(here,
MobileMule™ 5500
is taken as an
example). The device will restart if a mode is switched to the other. This product is a hybrid DH vehicle
MDVR supporting several types of camera connection. The interfaces for the analog camera are defined
as follows and the standard interface is for the IP camera. A user can select the proper camera type and
configure software properly according to hardware connection mode.
Select PAL/NTSC according to
image format of the video input
device.