- 44 -
Step 2: PTZ
From the Peripheral Setup menu, select the PTZ icon to enter the corresponding interface. Use default data
bit, stop bit and check code.
After set the PTZ parameters, you should choose PTZ corresponding channels to remote control th
e PTZ, such as PTZ on channel 2, so in the monitoring interface need switch to the maximum 2 chan
nel to control it.
Step 3: Wireless Setup
Use different protocols and
baud rates depending on PTZ
settings.
When there are many PTZs,
set different addresses for
easy identification. You can
directly input
the
address
value corresponding to the PTZ.