- 35 -
to move to the latter you want, press "Enter" to confirm your selection and press "Return" to return and
complete your input.
1.
IP address and port number are those for the network camera itself. Be sure to keep them
consistent when setting manually;
2.
Clicking on "Search" will list all IP cameras connected to the MDVR;
3. After setting, move your cursor to the "Save" key and press the "ENTER" key to save it.
4. Alarm Setup:
Step 1: Enter the Alarm Setup interface
Press the "Return" key to return to the Setup Menu and select the Alarm Setup interface, where you can set
sensor, speed, acceleration, temperature, motion detection, linkage setting and other alarm modes. The alarm
feature can be used only when an external sensor is connected. The alarm feature is enabled when following
enable settings are on. If "Event" is selected for alarm type. normal recording is conducted. If "Alarm" is
selected, alarm record is conducted; the threshold indicates the speed limit when the alarm is triggered.
