- 15 -
It is suggested that the vehicle mounted machine be directly powered from positive and negative terminals of the
battery cell, or led from the mains power at the fuse without use of ground strap, which may influence normal
operation of the mainframe due to negative pulse; The power cable used for positive and negative terminals shall
have diameter of φ1.5mm or above.
Step 9: Connect the display output unit
This product supports one HDMI and two CVBS video outputs (one is φ3.5 Phone Jack on the front panel,
and the other is 24PIN connector). A customer can connect to the display unit according actual conditions.
Connect the 3-in-1 terminal of the supplied 4pin-AV output cable to the φ3.5 Phone Jack on the front panel, and
the other terminal to the display unit.
This terminal is connected
to the power interface on the
rear panel of the MDVR
Before connecting, check that the voltage ranges
from 8V to 36V. If not, the device will be suspended.