- 40 -
The detection area is set as follow:
Select "Setup", and press the "Enter" key on the remote control to enter the motion detection setting interface,
1. S
elect the first block (yellow), and the motion block changes to blue after pressing the "Enter" key.
2. S
elect the second block and press the "Enter" key. The rectangular area formed by the diagonal of these
two blocks is defined;
3.
press the "Return" to return to the previous menu and press the "Save" key.
The environmental change may be
detected more easily when the sensitivity
is high; however, change of brightness and
color will also trigger an alarm; thus, this
alarm mode is not recommended.
Detection area, you can use your remote control
to select two points as diagonal to define the
detection area.