Raytools XC3000S Series, Commissioning Manual, Page: 76 / 138

XC3000S Series Laser Cutting
S
y
stem Commissioning Manual
10
5.2.2 Changing the slave connection order
Method 1: Use the above add, insert, delete, and repeat operation to change the slave connection order.
Method 2: Select the slave station you need to move, press and hold the mouse and drag it to the location
you want to move, and then release the left mouse button.
Note: The order from top to bottom is the actual order of the actual network cable serial slave, and the
position must correspond one by one, otherwise the slave can’t enter the OP state, resulting in the software
can’t operate!
5.2.3 Linking operations to slave sites
Add link:
1 ） Select the hardware pins to be linked and right click - Connection request.