Raytools XC3000S Series, Commissioning Manual, Page: 118 / 138

XC3000S Series Laser Cutting
S
y
stem Commissioning Manual
92
Absolute: Move to the zero position of the drive feedback, with the
position 0 of the drive feedback as the reference
point
Return origin direction
and type Positive Positive: When returning to zero, move in the positive direction to
find the return to zero, refer to the switch
Reverse: When returning to zero, move in the negative direction to
find the return to zero, refer to the switch
Return to home
signal Limit
Limit: Use the limit as a return to zero reference switch
Zero position: use zero position as a return to zero reference
switch
Return origin speed 0.9 Speed of finding the reference signal when returning to zero
Back distance 5 Distance from zero return to limit signal setback
Coordinate aft
backward set as 0 Coordinate value of the reference switch in the coordinate system
Origin point offset
compensation 0
Use the current point as the zero point; for temporary debugging
when commissioning without limit switches
Servo axis axis Fill in according to the actual configuration
Positive hard limit
signal DI9
NO Positive and hard limit pins can be set
NO: no output for limit in untriggered state, select this item
NC: output for limit in untriggered state, select this item
Negative hard limit
signal DI7
NO Negative hard limit pins can be set
NO: no output for limit in untriggered state, select this item
NC: output for limit in untriggered state, select this item
Soft limit range - 100~2 Range of Z-axis movement of the cutting head after the software
returns to zero
Back output DI6 Settable holding brake output pins