Raytools XC3000S Series, Commissioning Manual, Page: 116 / 138

XC3000S Series Laser Cutting
S
y
stem Commissioning Manual
92
7.6.2 Pitch
Pitch parameters
Parameter Name Default
Value Remarks
Open Pitch
Compensation Unchecked Enable and disable the pitch compensation function for the
corresponding axis
Reverse Offset None Interferometer parameters are inverted, and the error is inverted
for actual conditions
7.6.3 X
/Y
Back origin parameter
X/Y-axis Back origin parameters
Parameter Name Default
Value Remarks
Return origin mode Absolute Incremental: find the zero signal back to zero and use the zero
signal as a reference point
Absolute: move to the zero position of the driver feedback,
the Position 0 of the drive feedback is the reference point
Return origin direction and
type Negative
direction,
zero
position Positive: When returning to zero, move in the positive
direction
Negative: When returning to zero, move zero in the negative
direction:
Zero position: Use zero as the reference point to return to zero
Limit: determined according to the return to zero
direction, if the positive direction is selected, the positive limit
is reference point back to zero; if negative direction is
selected, the negative limit will be used as the reference point