Raytools XC3000S Series, Commissioning Manual, Page: 3 / 138

XC3000S Series Laser Cutting
System Commissioning Manual
Disclaimer
▪ We reserve the right to change the design in order to improve the quality or expand the application or comply
to manufacturing workmanship.
▪ We will not bear any responsibility for losses and accidents caused by wrong operation or improper handling
of our products.
▪ Dismantling of product will lose all warranty claims excluding the normal replacement of worn parts and
components required for maintenance or commissioning operations.
▪ Unauthorized modification of products or use of non-original spare parts will directly lead to the invalidation
of warranty and liability exemption.
▪ It is recommended to only use the spare parts provided by us or submit them to us or the designated
professional team for installation.
Use Regulations
▪ Ensure that the product is used in a dry environment.
▪ Ensure that the product is used in the environment required by EMC standards.
▪ The product is only allowed to run within the parameters specified in the technical data.
Personnel Responsibilities
▪ Be familiar with the basic provisions of work safety & accident prevention and have received equipment
operation guidance.
▪ Read and understand basic safety instructions and operations.
▪ You must have studied the relevant regulations and safety instructions and understand the possible hazards.
▪ Comply with relevant regulations and implement corresponding protective measures.