Raytools XC3000S Series, Commissioning Manual, Page: 114 / 138

XC3000S Series Laser Cutting
S
y
stem Commissioning Manual
92
Separate set Selected X-axis mechanical parameters and Y-axis mechanical parameters
are not synchronized, set separately
Positive hard limit signal DI3/D16
NO Positive and hard limit pins can be set
NO: no output for limit in untriggered state, select this item
NC: output
NC: output for limit in untriggered state, select this item
Zero signal DI2/D15
NO Settable zero pins
NO: no output for limit in untriggered state, select this item
NC: output for limit in untriggered state, select this item
Negative hard limit
signal DI2/D14
NO Negative hard limit pins can be set
NO: no output for limit in untriggered state, select this item
NC: output for limit in untriggered state, select this item
Servo axis Fill in according to the actual configuration
Soft limit range 0~ 1500 Range of X-axis movement of the cutting head after the
software returns to zero
All limits NO Unchecked X-axis and Y-axis limit signals are all NO
All limits NC Unchecked All X-axis and Y-axis limit signals are NC
Separate set Selected X-axis and Y-axis limit signals are set separately